// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *  
// Here is an example routine for using the BV5205, A to D IC
// note that by using currentSID, the BV4205 library is extended
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *  

// REQUIRES:
// #URL-lib "http://pin1.org/forthlib/flb/General/soft1.flb" sid=100
// #URL-lib "http://pin1.org/forthlib/flb/General/pinsel.flb" sid=101
// #URL-Lib "http://pin1.org/forthlib/flb/I2C/i2c.flb" sid=102
// #URL-lib "http://pin1.org/forthlib/flb/I2C/BV4205.flb" sid=103

// CONSTANTS:
// none

// #currentSID sid=103

// the following will extend the BV4205 library as it has the same sid
// as the current sid is set to
: demo
  66 4205-init invert abort" Can't initialise device using address 66"
  cr ." continually scanning 10 ports beginning at 0"
  1 a6  // enable autoscan
  begin
    key? abort" finished" // get out if user presses a key
    cr 10 0 a7 300 ms     // get 10 readings starting at 0
  again   
;

: <0>go demo ; // public word for this file

// #currentSID sid=0